🕷️ Spider-Ham (Peter Porker) - Multi Parts / 3MF/ NO AMS Included! 🐖

Meet Peter Porker, the hilarious and iconic anthropomorphic spider-pig from the Marvel Spider-Verse! Born a spider, he was bitten by a radioactive pig (Aunt May Porker) and gained super porcine powers to become the beloved Spider-Ham. 🕸️🐷

Key Model Features:
📏 Default Height: 20 cm (Feel free to scale it up as much as you like! Note: Joints are only limited if you scale down).
🧩 Assembly: Multi-parts design with NO AMS required!
✅ Tested: Fully test-printed and assembled with perfect fitting.
📹 Video Preview: Check out the assembly and details here: https://www.instagram.com/timroy3d/

⚠️ Important Note on the Web Details:
The black web lines on the suit need to be hand-painted if you want black webbing. However, I have also included an additional 3MF file configured for AMS printing specifically for the web pattern (since the webbing is too thin to be split into separate physical parts). 🎨

Package Includes:

📁 Complete STL files set

📁 2x 3MF files:

1x Setup file for printing WITHOUT AMS

1x Setup file configured for AMS printing (for the black web lines)

🛠️ Recommended Print Settings:

Layer Height: 0.16 mm (for ultra-smooth surface finish & crisp details)

Infill: 5- 10% (Gyroid recommended for structural strength)

Supports: Tree supports enabled 🌲

Top Z Distance: 0.25 -0.27mm (for effortless, clean support removal)

Adhesion: Brim highly recommended for small or narrow parts 🎯