Orcish Battle Hammer - Skyrim Two-Handed Cosplay Prop | STL, OBJ, 3MF

In The Elder Scrolls V: Skyrim, the Orcish Battle Hammer is a heavy two-handed weapon of Orsimer make, forged from orichalcum and iron in the Orc strongholds of the Reach. In the game it waits for the Dragonborn at places like Largashbur and the Rift Watchtower, built for crushing force rather than finesse.

This model recreates the hammer at full prop scale, about 1187 mm long, ready to print, assemble and paint for cosplay or wall display.

What you get:

• 9 pre-cut parts that fit a 220 x 220 x 250 mm print bed
• 8 joints, each keyed with a hexagonal pin for accurate alignment and no rotation
• Designed fit clearance: 0.15 mm per side
• Every part in STL, OBJ and 3MF, plus one ZIP with the full set
• Overall size: 1187.2 x 305.5 x 105.1 mm

Fan-made design inspired by The Elder Scrolls V: Skyrim. Not affiliated with Bethesda.

Suggested FDM settings (adjust to your printer):

• Layer height 0.16-0.24 mm, 3 walls
• Infill about 20% for the head parts (P01-P03), about 12% for the haft parts
• Supports needed for P01, P02, P03 and P09
• PLA or PLA+
• P08 (210.5 mm) must be printed standing upright.

Assembly: test-fit each hex pin before gluing; light sanding may be needed depending on your printer. Glue with CA or epoxy, then fill seams, prime and paint.

#3DPrinting #CosplayProp #Skyrim #BattleHammer #ElderScrolls #OrcishBattleHammer #FantasyWeapon #PropReplica #3DPrintFiles #STL