モデルの詳細
These panels are designed to be printed in “vase” or “spiralized” mode to minimize the amount of material needed, decrease print time, and give a smooth clean finish. They could be used as sound diffusion panels, decorations, or just to show off your new gradient filament!
See here for video: https://youtu.be/Gunky5qSwpc
This download includes two sizes of panels with 100mm or 200mm edge lengths. There are two mirrored versions of each panel. See here to learn more about the Hilbert Curve and how to properly orient the tiles: https://en.wikipedia.org/wiki/Hilbert_curve
Be sure to print in “vase” or “spiralized” mode! The base is 0.5mm thick. I recommend adjusting your settings so that the base prints in only two layers.
When printed with a 0.4mm nozzle as described above, the 100mm and 200mm panels use only 15g and 57g of filament respectively, meaning that you could cover a 1m x 1m surface with less than 1.5Kg of filament!
Download 3D files:
Minimal Height:
Square Hilbert Panel: https://than.gs/m/957250
Rounded Hilbert Panel: https://than.gs/m/957254
More sound diffusion panel designs:
Topology Tiles - Hex: https://than.gs/m/955066
Topology Tiles - Square: https://than.gs/m/955067
Models shown are printed with Sovol Rainbow Candy PLA
