Bonsai Pencil Holder

Organize your desk with this pencil holder bonsai. This model is 100% 3D printable, but you can substitute the leaves with paper versions if you have a paper cutting machine. There are SVGs attached with a ready to print Bambu Studio 3mf file. The SVGs are scaled to fit on an 8.5"x11" sheet.

You will need at least 38 leaves to fill all the slots. You will need to print 2 leaf plates or you will need to cut 3+ sheets from paper. A multicolor printer is not required, but you will need one if you want the two tone leaves. The 3d printed leaves are designed to accommodate a 1" tall strip of paper for writing reminder notes or memos. For the paper versions, you will need 3 of the 'Accent' sheets and 3 of the 'Full' sheets for the two tone paper effect. Otherwise, you can just do 3 of the 'Full' sheets for a single color.

The trunk pieces and pot feet snap together, so you can assemble this model without any glue or tape. When assembling the trunk, start at the bottom and work your way up.

Filament Used:
Polymaker PLA Jungle Green
Polymaker PLA Olive Brown
Polymaker PLA Cream
GEEETECH Matte PLA Terracotta