Abstract Hands Wall Mount Sculpture

A premium wall-mounted abstract sculpture designed as a modern decorative 3D printable model. The design features a minimalist human-inspired composition with sculptural hands holding a small vase, flowing hair details, and a clean geometric wall-mounting form. Its elegant silhouette and contemporary aesthetic make it suitable for modern interiors, art spaces, bedrooms, living rooms, and decorative installations.

The model is presented with a clean white textured finish to emphasize the sculptural details, layered forms, and surface depth. Designed as a ready-to-print 3D model, it can be produced using common 3D printing workflows and customized with different materials, colors, and finishes.

Features:
• Abstract wall-mounted sculpture
• Human-inspired artistic design
• Integrated flower vase
• Decorative flowing hair details
• Wall-mountable design
• Clean and printable geometry
• Suitable for FDM and resin printing
• Ideal for modern interior decoration
• High-detail sculptural surface
• Easy to customize and recolor

Print Instructions

⚠️ THIS MODEL HAS NOT BEEN PHYSICALLY TEST PRINTED.

This model is intended for 3D printing and should be carefully reviewed in your slicer before printing. Because the design is a wall-mounted decorative sculpture with relatively large flat surfaces and detailed sculptural elements, printing parameters may need to be adjusted depending on the printer, material, nozzle size, and desired surface quality.

Recommended settings:

Layer Height: 0.16–0.24 mm
Infill: 10–20%
Walls: 3–4 perimeters
Supports: Check and enable where required
Adhesion: Brim recommended for larger prints
Orientation: Keep the main wall surface as flat as possible against the build plate when the geometry allows
Material: PLA, PETG, or suitable resin
For finer sculptural details, use a smaller layer height
Always inspect the model for overhangs, wall thickness, and potential unsupported areas before printing.

Note: Actual print performance may vary depending on the printer, slicer settings, material, and scale selected. A test print is recommended before full-size production.