These candy reservoirs are compatible with the basic "Modular Candy Dispenser" found here: https://www.thingiverse.com/thing:4606016
This set of components was requested by a friend who requested a COVID-safe alternative to the open bowl of candy he usually kept on his desk.
These files are designed to be printed in "spiralized" or "vase" mode to create a nice outside surface and minimize the amount of material used.
The "enclosed full reservoir" needs to be printed spiralized with a 0.8 mm nozzle in order for the inner part of the rim to fit properly over the three push button cartridges.
The "enclose single reservoir" has a thin rim at the open end to compensate for the slight amount of warping that occurs during assembly. The standard modular dispenser will need three of these.
The "top cap" holds the top of the three reservoirs together, the "connector" holds the bottom of the reservoirs together and connects them to the push button cartridges.
You can also use these reservoirs as spacers if you wish to use fewer than three push button cartridges for the base.
See here for a video on how these and some of the other modules fit together: https://youtu.be/759B56bt7HI
See here for more modules:
Open Push Button Cartridges: https://www.thingiverse.com/thing:4606024
Voronoi Base and Reservoirs: https://www.thingiverse.com/thing:4606070
