模型詳情
- This is a lattice box with the walls designed for Spring, Summer, Autumn, and Winter.
- All five sides are designed with different lattice structures.
- The lattice structure is a "field-driven" design. In this case, the structural thickness is 0.5~1.25 mm.
- This should be a supportless design for FDM / LCD / DLP if the maximum horizontal overhang dimension of 2.6 mm could be overcome.
- Properly tilting the object could increase the success rate.
- Size : 76.5 mm x 76.5 mm x 102 mm
- 這是個牆壁以春、夏、秋、東四個季節為主題設計的晶格盒子。
- 五個面皆由不同的晶格結構進行設計。
- 此晶格結構是以"場驅動"的建模方式進行設計，結構的厚度會在0.5~1.25 mm漸進變化。
- 若可以克服最多2.6 mm的水平懸凸特徵，那麼此物件對於FDM/LCD/DLP應屬於本體不需支撐之物件。
- 適當地傾斜物件有機會提高列印成功率。
- 整體尺寸 : 76.5 mm x 76.5 mm x 102 mm
授權
版權由創作者擁有，您購買的模型僅適用於
個人使用
.
