ARCHAIC RAM — Stylized Ancient Sculpture & Monolithic Art Bust

ARCHAIC RAM — Monolithic Ancient Sculpture
An avant-garde fine art sculpture merging ancient archaic motifs with modernist sculptural geometry. Featuring sweeping, oversized circular horns, etched geometric fleece rosettes, and an integrated monolithic plinth, this piece is designed as a luxury architectural accent and tactile display collectible.
 Geometry: 100% watertight, non-manifold solid mesh
 Default Dimensions: 160 mm × 110 mm × 165 mm (H × W × D) — fully scalable
The settings are not tested in physically.
FDM Printing (Filament)
 Orientation: Upright, flat on the plinth base.
 Layer Height: 0.12 mm – 0.16 mm (Use adaptive layer height for the smooth top curves of the horns).
 Walls / Perimeters: 3 to 4 (1.2–1.6 mm wall thickness) to enhance surface detail and eliminate infill visibility.
 Infill: 10% – 15% Gyroid (provides uniform structural rigidity and balanced weight).
 Supports: Organic / Tree Supports (Recommended build-plate-only under the horn arches and chin overhangs).
 Recommended Filament: Matte Stone/Sandstone PLA, Marble PLA, or Matte Terracotta PLA for an authentic carved masonry finish.
 SLA / DLP Printing (Resin)
 Layer Height: 0.05 mm (50 µm)
 Hollowing: 2.0 – 2.5 mm wall thickness with internal infill struts.
 Drain Holes: Place 2 × 3–4 mm drain holes on the bottom surface of the plinth base.
 Orientation: Angled 30° – 45° backward to minimize cross-sectional peel force and hide support scars on the underside/back.
 Supports: Medium supports along contact edges and heavy supports anchored to the bottom plinth.