Which The Witcher statue STL should you print first without wasting resin, time, or shelf space? We’ve curated standout picks from our marketplace, popular on Pixup3D, and narrowed them into 12 designs worth your attention. If you can only grab one, start with Geralt – The Witcher 3 because it nails that gritty, battle-worn Witcher 3 look while giving you multiple display options in one kit. For resin printing, details such as swords, flowing hair, capes, and raised weapons benefit from careful orientation and support planning before you start.
Big, Cinematic Centerpieces
1. Geralt – The Witcher 3
Geralt’s stern stare, scarred face, and tied-back white hair set the tone before you even notice the layered armor work. The base sells the monster-hunter story too, with broken terrain and a defeated creature that keeps the whole scene grounded in Witcher 3 grit. At 426 mm tall, it’s a true display statue, not a “tuck it on a bookshelf” print. If you want something more compact and stylized instead, Chibi Ciri – Witcher is the small-footprint alternative.
2. Ciri – The Witcher 4 – Fullsize
Ciri comes across mid-victory here—feet planted on a grim battlefield base, sword ready, and that glowing chain detail pulling your eye back to her hands. The sculpt leans hard into worn leather, chainmail, and braided hair texture, so it rewards careful painting. It’s also a full-size piece at 409 mm tall, so plan for height and a sturdy display spot rather than a crowded desk corner.
3. Yennefer – The Witcher
Yennefer’s pose is all spellcasting confidence, with both hands raised as violet magic builds around her. The rocky base adds a darker mood through twisted roots and gothic props, which gives painters a lot of surfaces to separate with color and weathering. Size-wise it’s a substantial statue (404 mm tall), so it reads more like a centerpiece than a quick weekend print.
4. GERALT ZEZ STL
by ZEZ STUDIOS
Geralt’s moment here is pure action: he’s planted on top of a monster, weapons out, and the whole composition is built for drama. Compared with Geralt – The Witcher 3, this one pushes harder into a “combat diorama” vibe with a more aggressive scene underfoot. It’s also the priciest pick in the lineup at $25, so if you’re trying to stay closer to $20, the other Geralt statues in this article will fit better.
If your favorite parts of The Witcher are the unsettling monsters and swamp magic, the next picks lean into horror silhouettes and villain energy instead of heroic stances.
Dark Fantasy & Monster Mood
5. Crones the Witcher 3
by Denis
That red hat and the tattered robes instantly give this Crone a nasty, swamp-haunted presence. The sculpt is packed with gnarled textures, and the skull-strewn base turns it into a display piece that feels like it belongs in Crookback Bog. It’s also one of the most viewed Witcher picks on Pixup3D, and the popularity makes sense once you see how much character is baked into the silhouette.
Also on the Pixup3D blog: Best Articulated 3D Print Models to Try Now – Top 23 Picks!
6. Crones Brewess the witcher 3 for 3D printing
by Denis
And that hunched posture with the basket-like face covering is what makes Brewess so memorable on a shelf. The model leans into exaggerated anatomy, wrinkled skin, and layered rags, so it’s a fun project if you like painting grimy cloth and sickly skin tones. If you’d rather have a broader “Crones” centerpiece instead of a single named Crone, Crones the Witcher 3 is the better match.
7. Sukkub from the Witcher 3
by Denis
Horns, tail, and a seated pose give this Sukkub a calmer, more composed energy than the Crones. The style shifts toward a semi-real, anime-leaning look, so it stands out if you like your Witcher creatures a bit more stylized. At $17, it’s a cheaper way to add a monster character to your display lineup.
Not every Witcher print needs to be a towering statue. These next options are great when you want character variety, alternate styling, or a lower-cost file you can knock out between bigger projects.
Character Variety (and a Budget-Friendly Pick)
8. Triss Merigold 3D Print
Triss is posed with a calmer, “heroic caster” presence, and the flowing robes give you lots of fabric texture to shade and highlight. The included magical effects add motion around the figure, and the alternate versions let you choose the vibe you want on display. If you prefer a darker, more gothic sorceress scene with a busier base, Yennefer – The Witcher goes heavier on atmosphere.
9. Ciri 3D Print
This Ciri is all about forward momentum—one hand braced on rock, sword down at her side, and a face that reads focused rather than posed. The detailing on straps, belts, and clothing edges is crisp enough to feel “premium statue,” but the overall composition is simpler than the huge full-size Ciri builds. If you want the biggest, most elaborate battlefield base version, Ciri – The Witcher 4 – Fullsize is the one to compare it against.
10. Geralt 3D Print
Two swords, a tense stance, and that classic stoic Geralt expression. It’s a straightforward hero statue option when you don’t want the more elaborate monster-base scenes.
Also on the Pixup3D blog: New 3D Printable Models: Late July 2026 Top Picks
11. Chibi Ciri – Witcher
by grisy
This chibi Ciri goes cute and compact, and it’s the lowest price in the whole list at $4.90. It’s an easy add-on file when you want something lighter between larger, more serious display prints.
Phrozen Verified
Phrozen Verified models come pre-supported and are checked by Phrozen’s own team for LCD resin printing, with a 95% print success rate. Worth filtering for if you would rather not spend an evening placing supports by hand. See the collection.
The One to Print First
I’d print Geralt – The Witcher 3 first because the scale and base tell a complete story, so it feels like a “real statue” once it’s painted and displayed. If you don’t have room for a 426 mm-tall centerpiece, skip it and go with Chibi Ciri – Witcher for a compact, budget-friendly print instead. Plan the finishing stage as carefully as the print itself: wash, dry, and cure the resin properly, then clean up support marks before painting. Which character do you want staring back at you from the shelf next?
Frequently Asked Questions
What’s the best The Witcher STL under $10?
Chibi Ciri – Witcher is the clear value pick at $4.90. It’s a stylized, compact model that works well as a quick project between larger Witcher statues.
Which The Witcher STL files are ready for resin printing?
All of these curated picks are marked pre-supported, including Geralt – The Witcher 3, Ciri – The Witcher 4 – Fullsize, and Yennefer – The Witcher. For best results, print them on a resin machine from brands like Phrozen, especially when you want to preserve facial detail and layered armor textures.
Which Witcher model is easiest for a beginner to start with?
Chibi Ciri – Witcher is a friendly starting point because it’s small, simple, and low-cost. If you want a more “serious” statue while still keeping things manageable, Triss Merigold 3D Print is pre-supported and built around a clean standing pose.
How big are these Witcher statue prints?
The largest listed piece is Geralt – The Witcher 3 at 426 × 274 × 296 mm, which needs real display space. Other full-size centerpieces include Ciri – The Witcher 4 – Fullsize at 409 × 249 × 248 mm and Yennefer – The Witcher at 404 × 222 × 238 mm.
How should I prepare thin Witcher statue details for resin printing?
Thin swords, hair strands, capes, and raised accessories need careful support planning because they are more vulnerable during printing and cleanup. After printing, handle these details gently and balance surface detail against durability when choosing a resin for a display piece that may be moved or handled.