Please note that the Phrozen Verified pre-supported model guarantees 95% of successful prints only for the original, verified files printed with LCD printers. Risks of failure may occur due to variations in printing environments and resins. Error messages might be displayed due to slicer software incompatibility, but rest assured that all files have been verified across multiple slicing software and wouldn't affect printing results. If you encounter any issues, please go to PIXUP Help Center.
CTB Disclaimer
Models are pre-sliced with a 90% success rate and compatible ONLY with Aqua-Gray 8K for Sonic Mini 8K, Sonic Mighty 8K, Sonic Mega 8K, and Sonic Mega 8K S printers, while Aqua-Gray 4K is for Sonic Mini 4K and Sonic Mighty 4K printers. Since these files are pre-sliced with a temperature of 25°C and relative humidity of 75%, risks of failure due to variations in printing environments may significantly increase with higher discrepancies. Please also note that your models might not be printed when you are printing with resins or printers not mentioned above. In addition, printer types for this file are limited to those shown in the descriptions. If you encounter any issues, please go to PIXUP Help Center .
Model Description
VOLTRON Defender of the Universe
Welcome to the new version of Voltron.
This variant has been completely redesigned and features new ratchet joints.
The model shown was printed using Bambulab P1S and A1 printers BUT this model works with non multimaterial FDM printers from other brands as well.
All materials used are from Bambulab and are detailed in the instructions but you can of course use whatever brand you want.
This is the transformation procedure of all lions:
You will have access to the .STL files and .3mf profiles for BambuStudio.
Disclaimer: the BambuStudio files are what I have used and it worked well for me. Feel free to change the settings to your preferences.
I have uploaded a .zip folder to “other files” since it is easier for me to manage the models and update the folder on the go.
Some of the parts need to be glued; and additional hardware is required for this model. Details can be found in the assembly instruction.
All parts will fit a 256 x 256 mm print-bed and are ready-to-print.
What does ready-to-print mean: This means, that all parts are oriented to be dropped into your slicer. Supports are not part of the model since everyone has its own preferences.
The following Bambulab filaments have been used:
Basic PLA Jade White (10100)
Basic PLA Gray (10103)
Basic PLA Bronze (10801)
PLA Matte Lemon Yellow (11400)
PLA Matte Charcoal (11101)
PLA Matte Marine Blue (11600)
PLA Matte Scarlet Red (11200)
PLA Matte Grass Green (11500)
This is a preview of the assembly Instruction for one lion to have a better Idea of the project:
