Chroma Kit Strands Removal Belt
Designed for the Phrozen Chroma Kit multi-color module, the Strands Removal Belt automatically carries away waste filament produced during multi-color prints. This will prevent buildup that could cause print failures, keeping your prints smooth and reliable.
Model Specifications
The brackets are designed with additional clearance to ensure smooth movement of the PTFE tubing during operation. The design includes two files(left and right), and each bracket size is 170 x 93 x 287 mm. Approximately 400g of filament is required per bracket.
Instructions (The model file includes an instruction.)
https://drive.google.com/drive/u/0/folders/1mV6zJScxSmbC_WkpoPk09K568rsxvLS0
Chroma Kit 廢料廢寮傳送帶
專為 Phrozen Chroma Kit 多色模組 設計的 廢料運輸器，可將多色列印過程中產生的廢料自動導出，有效避免廢料堆積造成列印失敗，讓多色列印更穩定順暢。
搭配 Phrozen Chroma Kit 多色模組 附贈的電機零件 即可使用。
模型資訊
此支架設計預留額外空間，確保列印時 PTFE 管能順暢移動。設計包含左右兩個檔案，每個支架尺寸為 170 x 93 x 287 mm，每個支架約需耗材 400g。
說明書（模型檔含有說明書）
https://drive.google.com/drive/u/0/folders/1mV6zJScxSmbC_WkpoPk09K568rsxvLS0
