$ 0.00
Set up your candy dispenser just the way you want it!
This set of files contains basic options for bases and enclosed push button modules. Everything is interchangeable. It is sized specifically for "Gobstoppers" which are between 13-14 mm in diameter. The holes are 15 mm to allow for extra clearance.
If you want the candy to come out on the same side as the button, print the "self serve" files. If you want the candy to come out on the opposite side, print the "guest serve" files. You will need to print out both the "left" and "right" for each cartridge.
You will need three cartridges to fit into the bases provided. If you want fewer than three button, simply use one of the single reservoirs as a spacer (and to store extra candy!): https://www.thingiverse.com/thing:4606028
Print out three "springs." The springs are designed as separate components so that they can be replaced easily if as needed.
You will also need to print out three "buttons."
If you want all the candies to come out on the same side, print "single side base." If you want to have candy coming out both sides, print "double sided base."
See here for a video on how these and some of the other modules fit together: https://youtu.be/759B56bt7HI
See here for more modules:
Open Push Button Cartridges: https://www.thingiverse.com/thing:4606024
Enclosed Candy Reservoirs: https://www.thingiverse.com/thing:4606028
Voronoi Base and Reservoirs: https://www.thingiverse.com/thing:4606070
See here for alternate designs:
Push Button Gumball Machine: https://www.thingiverse.com/thing:4510653
Trump Gumball Machine: https://www.thingiverse.com/thing:4514867
