Please note that the Phrozen Verified pre-supported model guarantees 95% of successful prints only for the original, verified files printed with LCD printers. Risks of failure may occur due to variations in printing environments and resins. Error messages might be displayed due to slicer software incompatibility, but rest assured that all files have been verified across multiple slicing software and wouldn't affect printing results. If you encounter any issues, please go to PIXUP Help Center.
CTB Disclaimer
Models are pre-sliced with a 90% success rate and compatible ONLY with Aqua-Gray 8K for Sonic Mini 8K, Sonic Mighty 8K, Sonic Mega 8K, and Sonic Mega 8K S printers, while Aqua-Gray 4K is for Sonic Mini 4K and Sonic Mighty 4K printers. Since these files are pre-sliced with a temperature of 25°C and relative humidity of 75%, risks of failure due to variations in printing environments may significantly increase with higher discrepancies. Please also note that your models might not be printed when you are printing with resins or printers not mentioned above. In addition, printer types for this file are limited to those shown in the descriptions. If you encounter any issues, please go to PIXUP Help Center .
Model Description
The model is divided into 3 and 7 sections
Contain: OBJ file; STL file
If you liked it, leave me a review and a rating. I would appreciate it.
